You will see dialogue windows in the order set below.
We shall lead you though the procedure and give you the
responces required for the correct Sun Chili!Soft ASP installation.
On each step, you will have to choose one of the options
suggested. The default choice is shown in square brackets
e.g. [1], the option that you need to choose if is shown
in bold in the description below next to the default one,
e.g. [1] 2 -- the correct choice is option 2.
Step I.
----------------------------------------------------------------------
Sun Chili!Soft ASP - Installation
--------------------------------------------------------------------
Setup will now install the files needed to run and configure
Sun Chili!Soft ASP to a directory that you specify. To
accept the default (shown in brackets below), press Enter.
To specify a different directory, enter the pathname and
then press Enter.
Note: Configuration options specific to this installation
are contained in the directory that you specify. Make
a note of this location, so you can easily find Sun Chili!Soft
ASP files at a later time.
------------------------------------------------------------------
Enter the directory in which to install Sun Chili!Soft
ASP [/opt/casp] /hsphere/shared/casp
Extracting files to /hsphere/shared/casp ...
+ bean-classes package . done.
+ bean-jre package ......... done.
+ bean package . done.
+ caspdoc package ................ done.
+ caspsamp package ... done.
+ casp package . done.
+ chilicom package ... done.
+ components package . done.
+ installer package . done.
+ license package . done.
+ module package . done.
+ odbc-direct-40 package ........ done.
+ odbc-opensource package . done.
+ server package .. done.
+ sqlnk-4_51 package . done.
+ chili-tools-linux2 package .. done.
+ supporting binary / library packages . done.
Step II.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Product Serial Number
--------------------------------------------------------------------
Sun Chili!Soft ASP requires a valid serial number to run.
If you downloaded this product from the Web, you should
have received an e-mail message that included your serial
number. If you are installing this product from a CD-ROM,
the serial number is printed on the CD-ROM case. If you
do not have a serial number, enter 'n' below to receive
a 30-day trial license.
Note: iPlanet 6.0 users are already licensed to use this
product and do not need to enter a serial number. If you
are using iPlanet 6.0, enter 'n' below to receive a full,
unlimited license.
--------------------------------------------------------------------
Do you have a Sun Chili!Soft ASP Product Serial Number
(y/n)? [y] y
Note: If you wish to exit out of the license key installer,
type none.
Enter your Sun Chili!Soft ASP Product Serial Number
[none] Y_O_U_R_ S_E_R_I_A_L
Step III.
----------------------------------------------------------------------
Sun Chili!Soft ASP - Bundled Apache 1.3.19 Configuration
-----------------------------------------------------------------------
Sun Chili!Soft ASP includes a ready-to-run Apache 1.3.19
Web server that is configured with Microsoft (TM) FrontPage
Extensions support and EAPI (Extended API). If you have
not yet configured a Web server, you now have the option
to install this preconfigured Apache Web server.
Note: Sun ChiliSoft ASP supports but does not install
FrontPage Extensions; those must be obtained
from Microsoft. For more information about Sun Chili!Soft
ASP support for FrontPage Extensions, see
'Chapter 3' in our production documentation. For more
information about EAPI, including the mod_ssl / OpenSSL
module, visit www.modssl.org
---------------------------------------------------------------------
Would you like to install the bundled Apache 1.3.19 Web
server (y/n)? [n] n
Step IV.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Language Selection
----------------------------------------------------------------------
Sun Chili!Soft ASP supports various languages. Select
the language you want to use from the list below.
1. English - US
2. English - British
3. Japanese Shift-JIS
4. German
5. Dutch
6. Spanish
7. French
-----------------------------------------------------------------------
Which language would you like to use? [1] 1
Step V.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Configuring Java Support
---------------------------------------------------------------------
The Sun Chili!Beans component allows you to directly access
Java objects and classes from inside your ASP scripts.
For this functionality to be provided, a Java runtime
environment (JRE) must be installed. Sun Chili!Soft ASP
includes JRE 1.3.1. While other JREs are supported, the
use of JRE 1.3.1 is strongly recommended. Choose option
1 to use the bundled JRE.
1. Use the bundled JRE 1.3.1.
2. Specify the path to an existing JRE.
3. Disable Java support.
----------------------------------------------------------------------
Which JRE would you like to use? [1] 3
Are you sure you want to disable Java support (y/n)? [n]
y
Step VI.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Web Server Auto-Detection
-----------------------------------------------------------------------
Setup will now conduct a search of your system to generate
a list of installed Web servers. On the next screen, you
have the option to enable ASP support for one of these
detected Web servers. If you want to skip this step, you
can specify the pathname to a specific Web server by choosing
option 4 below.
1. Exhaustive search (slow)
2. Search in: /usr, /opt, /etc, /var (moderate)
3. Search the common Web server locations (fast)
4. Don't search (specify Web server on next screen)
----------------------------------------------------------------------
Which type of search would you like to perform? [2] 4
Step VII.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Web Server Configuration
----------------------------------------------------------------------
No Web servers have been detected. As options, you can
manually specify Web server information to aid in detection,
direct Setup to try to detect more Web servers, or delay
Web server configuration until another time.
1. Specify the Web server.
2. Attempt to auto-detect more Web servers.
3. Do not configure a Web server.
----------------------------------------------------------------------
Which configuration option would you like to perform?
[1] 1
Step VIII.
---------------------------------------------------------------------
Sun Chili!Soft ASP - User-specifed Web Server Configuration
----------------------------------------------------------------
Listed below are the types of Web servers to which this
version of Sun Chili!Soft ASP will install:
1. Apache
2. Netscape / iPlanet
3. Zeus
4. Cancel user-specified Web server configuration.
----------------------------------------------------------------------
Which Web server type do you want to configure? [1] 1
BEFORE REPLYING TO THE NEXT QUESTION, DO THE FOLLOWING
STEPS FROM ANOTHER SERVER CONSOLE:
a) check if your version of H-Sphere Apache server is
different from the suported bundle version
# /hsphere/shared/apache/bin/httpd -v
b) if it is, do two additional steps:
#mkdir -p /hsphere/shared/casp/module/linux2_optimized/apache_1.3.{corresponding_number}/eapi
#cp /hsphere/shared/casp/module/linux2_optimized/apache_{number_of_bundle_vesion}/mod_casp2.so
\
/hsphere/shared/casp/module/linux2_optimized/apache_1.3.{corresponding_number}/eapi
c) return to the installation console.
NOTE: Regardless of this fact, you may be able to build
your own module that supports this version of Apache.
Refer to Sun Chili!Soft ASP documentation for information
on building your own module. After the module has been
built, proceed to the following steps:
(1) # mkdir -p /hsphere/shared/casp/module/linux2_optimized/apache_1.3.23/eapi
(2)# cp <generated build dir>/mod_casp2.so /hsphere/shared/casp/module/linux2_optimized/apache_1.3.23/eapi
(3) Re-run the the installer by executing the following
script:
HASH(0x81b9b84)-{asphome}/INSTALL/install
After placing the file into the created module directory,
the installer will recognize it as a supported Web server
and act accordingly.
Step IX.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Apache Configuration
----------------------------------------------------------------
Because of the way the Apache Web server works, few of
the configuration questions listed below can be answered
outright. However, wherever possible, default values have
been provided for some of the questions.
Note: To exit Web server configuration, type 'none' for
the listed option.
---------------------------------------------------------------------
Enter the path and file name of the Apache Web server
configuration file:
[none] /hsphere/shared/apache/conf/httpd.conf
Enter the path and file name of the Apache binary:
[/hsphere/shared/apache/bin/httpd]
Step X.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Web Server Configuration
---------------------------------------------------------------
The following list contains all currently detected Web
servers. If the Web server for which you want to enable
ASP support appears below, enter the number that corresponds
to the Web server. If the Web server is not listed, you
can manually specify Web server information to aid in
detection, direct Setup to try to detect more Web servers,
or delay Web server configuration until another time.
1. Apache Secure Server
Settings file: /hsphere/shared/apache/conf/httpd.conf
Port: 80
2. Specify the Web server.
3. Attempt to auto-detect more Web servers.
4. Do not configure a Web server.
----------------------------------------------------------------------
Which configuration option would you like to perform?
[1] 1
Step XI.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Web Server Verification
----------------------------------------------------------------
Setup has automatically detected the following information
about the Web server you selected on the previous screen.
If the information is correct, type 'y' and press Enter.
If the information is incorrect type 'n', press Enter,
and then select 'Specify the Web server' from the menu.
Web server information:
Main configuration file: /hsphere/shared/apache/conf/httpd.conf
Binary: /hsphere/shared/apache/bin/httpd
Version: 1.3.19
Type: Apache
Port: 80
Root: /hsphere/shared/apache
---------------------------------------------------------------------
The Web server information is correct (y/n). [n] y
Step XII.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Server Configuration
----------------------------------------------------------------
Setup will now configure the Sun Chili!Soft ASP Server.
Unless you are an experienced Sun Chili!Soft ASP user,
it is strongly recommended that you use the default configuration
settings (option 1, below). If you choose the custom configuration
option, you will be asked to specify a number of settings.
For detailed information about configuring Sun Chili!Soft
ASP, see 'Chapter 3' in the product documentation.
1. Default configuration.
2. Customize configuration.
3. Choose another Web server to install to.
----------------------------------------------------------------------
Select a configuration option. [1] 1
Step XIII.
---------------------------------------------------------------------
Chili!Soft ASP - Administration Console Installation
-----------------------------------------------------------------------
Setup will now install the Sun Chili!Soft ASP Adminstation
Console. Unless you are an experienced Sun Chili!Soft
ASP user, it is strongly recommened that you choose the
default configuration (option 1, below). If you choose
the custom configuration option, you will be asked to
specify a number of settings. For detailed information
about configuring the Sun Chili!Soft ASP Adminstration
Console, see 'Chapter 3' in the product documentation.
Note: If you choose the 'Default configuration' option,
the username and password will be set to default values.
To protect the security of your server, you should change
these settings immediately after installation. For more
infromation, see the product documentation.
1. Default configuration
2. Custom configuration
----------------------------------------------------------------------
Select a configuration option for the Administration Console.
[1] 1
Step XIV.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Administration Console Information
----------------------------------------------------------------
Setup has finished installing the Administration Console.
To configure Sun Chili!Soft ASP, you can connect to the
Administration
Console from a URL or from the command line, as shown
below. For more information about configuring Sun Chili!Soft
ASP, see 'Chapter 3' in the product documentation. It
is a good idea to print this page for future reference.
---------------------------------------------------------------------
To start, stop and add users, use this script: /var/casp/admtool
The console's username is: admin
The console's password is: root
To continue, press Enter.
Step XV.
---------------------------------------------------------------------
Sun Chili!Soft ASP - Setup Complete
----------------------------------------------------------------
Sun Chili!Soft ASP has been successfully installed! Important
next steps:
-- Read the README file that came with Sun Chili!Soft
ASP. This file contains the latest installation and application
notes.
-- Read the 'Getting Started' section in the 'Sun Chili!Soft
ASP Quick Start Guide.' This guide provides basic information
about getting started with Sun Chili!Soft ASP, and points
you to additional resources.
-----------------------------------------------------------------
Summary file: /var/casp/logs/install_summary
